Automation Series
A Labor-Saving “delvo” for Automatic Assembly Robot
- Vibration-proof and shock-Proof for long continuous screw
tightening - Torque-up signal output
- High repetitive torque accuracy
Open E-Catalog
Watch Video
Description
Additional information
| Brand |
Nitto Kohki |
|---|
Related products
Digital Torque Screwdriver
Digital Torque Screwdriver DBDT-Series
- Works in both CW and CCW directions
- Accuracy: +/-3%
- Over-torque preventing function installed
- 2 measurement modes available(Peak & Tracking Mode)
- Controllable torque range 30~300cNm & 60~600cNm
- With bit changeable function
- Alert by beeping sound and Red LED when reaching the target torque
Open E-Catalog
Watch Video
STC series
Simple Torqon (STC Series)
- Easy Operation : Setting of target torque is easy owing to target torque setting dial. Setting of socket and nut is easy owing to free joint mechanism.
- High Accuracy : Repeated tightening torque accuracy: within +5% against required torque.
- Rotation to both directions : Main function such as torque control, soft start and free joint mechanism are common to both clockwise and counter clockwise directions.
- No Vibration: No impacting shock during use. No vibration and low noise.
- Simple Design : All necessary functions are incorporated in the wrench for no distractions during torquing.
- Automatic shut-off at preset torque
- Tone impact sockets can be used
Open E-Catalog
Watch Video
G Series Shear Wrench
G Series Shear Wrench TONE brand is a pioneer of Shear Wrench and
is 100% Made in Japan and is highly reliable.
Shear Wrench are designed for special TC Bolts. TC
Bolts tip are sheared by the special sockets.
A cut off tip of the TC bolt means that the torque is
achieved. It helps in visual inspection of the bolts.
Bolting Quality is maintained.
It is very helpful for steel structure bolting applications
where the number of bolts to be tightened are more.
Tension Control Bolt (TC Bolt) is calibrated bolt.
It knows when required tension has been reached
• A splined tip, grasped by Inner socket, and Nut
covered by Outer socket, countervailing
respectively, prevent bolt from turning
• When tip is gone, tension is correct.
Open E-Catalog
Watch Video
HDT series
Digital Torque Measurement Device HDT-Series
Works in both CW and CCW directions
- 2 measurement modes available(Peak & Tracking Mode)
- Over-torque preventing function installed
- Accuracy: within +/-3%
- Simple & Easy Tightening torque management!
- 2 measurement modes available(Peak & Tracking Mode)
- Alert by beeping sound when reaching the target torque.
Open E-Catalog
Watch Video
Robotic Feed
Screw feeder OM26-series for Steel screws (Magnetic)
- Hopper capacity: 300cc
- Applicable screws M2 ~ M6 for Steel Screws only
- Length up to 25mm