Open End Spanner
Open End Spanner Version upto 75Nm
- Specialized for tightening flare joints/nut on air conditioner units.
- Preset torque for flare joints/nuts.
- On reaching preset torque, the wrench makes a clicking sound as well as a light retroaction.
- Repeated Accuracy: ± 4%
Open E-Catalog
Watch Video
Description
Related products
AC – Brush Model
Features
The most popular models have been redesigned
Equipped with bit grounding mechanism
- Long-life cam is utilized
- The clear plastic torque adjustment ring cover minimizes unintentional tampering of the preset torque
- The changeover switch enables operators to change forward/reverse rotation with a single hand
- The ergonomically designed grip can be held tightly to resist against tightening reaction force, resulting in reduced operator fatigue
Open E-Catalog
STC series
Simple Torqon (STC Series)
- Easy Operation : Setting of target torque is easy owing to target torque setting dial. Setting of socket and nut is easy owing to free joint mechanism.
- High Accuracy : Repeated tightening torque accuracy: within +5% against required torque.
- Rotation to both directions : Main function such as torque control, soft start and free joint mechanism are common to both clockwise and counter clockwise directions.
- No Vibration: No impacting shock during use. No vibration and low noise.
- Simple Design : All necessary functions are incorporated in the wrench for no distractions during torquing.
- Automatic shut-off at preset torque
- Tone impact sockets can be used
Open E-Catalog
Watch Video
Robotic Feed
Screw feeder OM26-series for Steel screws (Magnetic)
- Hopper capacity: 300cc
- Applicable screws M2 ~ M6 for Steel Screws only
- Length up to 25mm
Open E-Catalog
Torque Checker – TTC
Torque Wrench Checker
Check anytime the actual torque
- value before using the torque wrench.
- Visible LED Display prevents mistake in reading the torque value.
- 3 measurement mode are installed (Peak mode/Track mode/Peak hold mode).
- Available for various size and head of the wrench by using Adaptors.