Double Action Nipper
- For cutting or crimping of resin or metals
- Blade opening and closing is driven by air piston.
- Having no spring mechanism in the main unit facilitates maintenance.
Open E-Catalog
Description
Additional information
| Brand |
Vessel |
|---|
Related products
Round Nippers
- The position of air intake port is 180-degree rotatable.
- Two air intake ports are provided, so they can be switched depending on the mounting place.
- These are fixing hardware for sprue cutting of direct gates or mounting to an automatic machine.
- This unit is to be used in case the originally required pressure is not obtainable by the limit of space and air pressure.
- The main unit is variable: the angle can be easily adjusted 0 to 600
Open E-Catalog
Watch Video
Thrust-Cut Nipper
Thrust Cut Air Nipper
- These nippers are equipped with a foot switch and are linked to high precision drivers enabling the cutting of film shaped gates from the thin end, preventing wrinkles around the cut.
- This is a dedicated set of blades for GT-NK 10. Suitable for processing of film gates attached to robot hands.
- Connected between the compressor and the air nippers.
- The timing controller enables adjustments to the slide and cutting timing (Approximately 0.5 seconds to 1.5 Seconds).
Open E-Catalog
Slide-Off Nipper Bracket Type
- For cutting or crimping of resin or metals
- With a laterally facing blade for plastics mounted, this nipper is suitable for a gate cutting by inserting the body and place itself close to the gate in a difficult space for a nipper installation.
- VESSEL has achieved smooth and continuous slide movement even for large diameter gate cuts, which produces a large shock at each cut